Jeti MSpeed 450 EX telemetri sensor
Afhentning er tilgængelig her: Modelhobby Shop / Blokken 17, 3460 Birkerød
Normalt klar inden for 4 timer
Fartmåler sensor op til 450 km/t.
Dimensioner: 22x25x13 mm
Pitot rør dimension: 54x3 mm
Vægt: 21 gram
Måleområde: 20 til 450 km/t
Nøjagtighed: 10 km/t
MSPEED EX is a sensor which measures the speed of a flying model through the air to provide the indicated airspeed (IAS). The reporting of airspeed can be very instructive with regard to the control of a flying model, for example allowing the pilot to determine the model´s stall speed and set an alarm to indicate when the model falls below this speed.
Another function of the sensor is to allow the pilot to set a desired speed and a step above or below this speed at which an acoustic signal should be sounded by the transmitter module. To facilitate easier reading of the indicated airspeed, a bar graph is displayed, marking the appropriate configured steps. The measurement of airspeed is based on the principle of change in dynamic pressure, measured by a Pitot tube, which is connected by silicon tubing. With the help of the wireless Duplex system, this sensor information can be reported to the pilot in realtime, allowing immediate feedback in airspeed changes and a deviations from the configured steps.
Retunering
Nem og tryg returnering.
Du har 14 dages returret, og vi hjælper dig gerne, hvis du ønsker at sende varen tilbage eller få den byttet.
Sikker betaling
Betal sikkert med:
MobilePay, betalingskort, Apple Pay, Google Pay og Klarna.
Alle betalinger krypteres og håndteres efter højeste sikkerhedsstandard.